The range
We supply rails for every application: from Vignole rails in main line tracks to grooved rails for tramways and crane rails for industrial use. New and used.
Upon request, we can also handle further processing, including cutting, bending, slotting, and slotting for tie-down straps.
We supply new rails in lengths of 12, 15, 18, 30, 60 and 120 meters, as well as in all standard and special grades. We keep the most common rail profiles in stock in lengths of up to 30 meters and can customize them flexibly to your requirements. Furthermore, we also support you with special profiles and individual requirements with tailor-made solutions.
We supply used Vignol tracks as standard in lengths of 12 to 15 meters. Additional lengths are available upon request and can be provided according to your individual requirements.
| Profile (EN) | Weight kg/m | Height mm | Foot mm | Head mm | Rm min N/mm² | supply |
|---|---|---|---|---|---|---|
| S 7 | 7,00 | 65 | 50 | 25 | 540 | 5 / 6 |
| S 10 | 10,00 | 70 | 58 | 32 | 540 | 6 / 8 / 10 / 12 |
| Section 14 | 14,00 | 80 | 70 | 38 | 690 | 6 / 8 / 10 / 12 |
| Section 18 | 18,30 | 93 | 82 | 43 | 540 / 690 | 6 / 8 / 10 / 12 |
| S 20 | 19,84 | 100 | 82 | 44 | 690 | 6 / 8 / 10 / 12 |
| S 24 | 24,43 | 115 | 90 | 53 | 690 | 8 / 12 |
| S 30 | 30,03 | 108 | 108 | 60,30 | 690 | 12 / 15 |
| 33 E1 | 33,47 | 134 | 105 | 58 | 680 | 12 / 15 |
| s. 41A | 41,24 | 138 | 125 | 67 | 690 / 880 | 12 / 15 |
| ASCE 85 (GX 42) | 42,16 | 131,76 | 131,76 | 65,09 | 835 | 12 / 15 |
| 49 E1 | 49,39 | 149 | 125 | 67 | 880 / 1080 | 12 / 15 / 18 / 30 |
| 49 E5 | 49,13 | 149 | 125 | 67 | 880 / 1080 | 12 / 15 / 18 / 30 |
| 54 E1 | 54,77 | 159 | 140 | 70 | 880 | 12 / 15 / 18 |
| 54 E4 | 54,31 | 154 | 125 | 67 | 880 / 1080 | 12 / 15 / 18 / 30 |
| 60 E1 | 60,21 | 172 | 150 | 72 | 880 / 1080 | 12 / 15 / 18 / 30 |
| 60 E2 | 60,03 | 172 | 150 | 72 | 880 / 1080 | 12 / 15 / 18 / 30 |
| R 65 | 64,86 | 180 | 150 | 73 | 880 | 12 / 15 |
Stock list according to the delivery programme of our partner Heinrich Krug GmbH & Co. KG. Further sections, including 54 E2, 54 E3, 46 E2 and 50 E6, available upon request. Which steel grade corresponds to which minimum tensile strength is detailed in the Quality overview.
We primarily supply new grooved rails in lengths of 12, 15 and 18 meters in all standard and special grades.
In addition, we undertake the route planning and prefabrication of complete grooved rail tracks.
| Profile | Weight kg/m | Height mm | Foot mm | Head mm | track width mm | groove width mm | Rm min N/mm² | supply |
|---|---|---|---|---|---|---|---|---|
| 57 R1 | 56,54 | 182 | 150 | 127 | 51,92 | 60,46 | 680 / 880 | 12 / 15 / 18 |
| 67 R1 | 66,76 | 180 | 180 | 135 | 60,03 | 58,66 | 680 / 880 | 12 / 15 / 18 |
| 59 R2 | 58,20 | 180 | 180 | 113 | 55,83 | 42,35 | 680 / 780 / 880 | 12 / 15 / 18 |
| 60 R1 | 60,59 | 180 | 180 | 113 | 56 | 36 | 680 / 780 / 880 | 12 / 15 / 18 |
| 60 R2 | 59,75 | 180 | 180 | 113 | 55,83 | 36,35 | 680 / 780 / 880 | 12 / 15 / 18 |
| 54 R2 | 54,26 | 152,50 | 141,50 | 115,60 | 56,20 | 41 | 680 / 780 / 880 | 12 / 15 / 18 |
| Ri55NK | 55,45 | 150 | 150 | 113 | 56 | 36 | 680 / 780 / 880 | 12 / 15 / 18 |
Stock list based on the delivery range of our partner Heinrich Krug GmbH & Co. KG. We now stock grooved rails in lengths of 12, 15 and 18 metres. Further steel grades and designs are available upon request. Which steel grade corresponds to which minimum tensile strength can be found in the Quality overview.
We supply track rail profiles for a wide variety of common Vignon track profiles. The combination of the Vignon track profile and the Krug track rail profile makes it possible to securely integrate rail installations into asphalt, concrete or paving surfaces.
In addition to the delivery, we can also offer you the customized processing of the track rails according to your requirements. These include:
| For rail profile | groove width mm | Max. length m | Weight kg/m | Execution |
|---|---|---|---|---|
| 41 E1 | 53,7 | 15 | 22,30 | Standard |
| 49 E1 / E5 | 56,0 | 15 | 22,30 | Standard |
| 54 E4 | 56,5 | 15 | 22,30 | Standard |
| 54 E1 | 56,0 | 15 | 21,50 | Standard |
| 60 E1 / E2 | 56,0 | 15 | 22,30 | Standard |
| R 65 | 56,0 | 15 | 21,70 | Standard |
| 49 E1 / E5 | 45,0 | 15 | 21,90 | special shape |
| NP 46 / 46 E3 | 53,0 | 15 | 21,60 | special shape |
Stock list according to the delivery programme of our partner Heinrich Krug GmbH & Co. KG. The track-groove rail is placed opposite the groove rail to form the counter-rail. Further designs available on request.
Together with our partner Heinrich Krug, we supply all common rail track profiles, usually in stock, especially the A45 to A150 series according to DIN 536 as well as flat and special profiles. In addition, we offer the complete machining of these profiles, including cutting to fixed lengths, right-angled or chamfered cuts, milling for fixing points, reducing the rail foot width and step stops.
Our specialist department for crane runway technology will advise you on crane rails, fixing materials, installation, as well as material and installation technology. Upon request, we can support your project from planning through to delivery and carry out on-site installation, including documentation via measurement reports and the welding of rail joints.
We also supply the following for the crane runway system:
| Profile | Weight kg/m | Height mm | Foot mm | Head mm | Stairway mm | Rm min N/mm² | supply |
|---|---|---|---|---|---|---|---|
| A 45 | 22,10 | 55 | 125 | 45 | 24 | 690 / 880 | 10 / 12 / 15 |
| A 55 | 31,80 | 65 | 150 | 55 | 31 | 690 / 880 | 10 / 12 / 15 |
| A 65 | 43,10 | 75 | 175 | 65 | 38 | 690 / 880 | 10 / 12 / 15 |
| A 75 | 56,20 | 85 | 200 | 75 | 45 | 690 / 880 | 10 / 12 / 15 |
| A 100 | 74,30 | 95 | 200 | 100 | 60 | 690 / 880 | 10 / 12 / 15 |
| A 120 | 100 | 105 | 220 | 120 | 72 | 690 / 880 | 10 / 12 / 15 |
| A 150 | 150,30 | 150 | 220 | 150 | 80 | 690 / 880 | 12 / 15 |
| MRS 87A (PRI 85) | 86,80 | 152,40 | 152,40 | 101,60 | 34,93 | 690 / 880 | 12 / 15 |
| MRS 125 | 125 | 180 | 180 | 120 | 40 | 690 / 880 | 12 / 15 |
| MRS 221 | 221,40 | 160 | 220 | 220 | 145 | 690 / 880 | 12 / 15 |
| SP 100 | 89,05 | 150 | 150 | 100 | 38 | 690 / 880 | 12 / 15 |
| SP 120 | 118,28 | 170 | 170 | 120 | 44 | 690 / 880 | 12 / 15 |
| CR 104 (MRS 51) | 51,59 | 127 | 127 | 63,50 | 25,40 | 690 / 880 | 12 / 15 |
| CR 105 (MRS 52) | 52,09 | 131,80 | 131,80 | 65,10 | 23,80 | 690 / 880 | 12 / 15 |
| CR 135 (MRS 67) | 66,97 | 146 | 131,80 | 87,30 | 31,80 | 690 / 880 | 12 / 15 |
| CR 171 (MRS 85) | 84,83 | 152,40 | 152,40 | 109,20 | 31,80 | 690 / 880 | 12 / 15 |
| CR 175 (MRS 87B) | 86,80 | 152,40 | 152,40 | 108 | 38,10 | 690 / 880 | 12 / 15 |
Inventory list according to the delivery program of our partner Heinrich Krug GmbH & Co. KG. Additional kranschienen profiles and special lengths available upon request.
Beyond our standard rail profiles, we are also ready to assist you with special requirements. Thanks to in-depth market knowledge and reliable partners, we can also supply profiles outside our standard range.
The strength of a rail lies not in its profile, but in its steel. Every profile is available in several grades: the same geometry, different hardnesses of the running surface. Which grade is the right one is decided by the load: curve radius, axle load, type of traffic.
| Kindness | Tensile strength Rm | Surface hardness | elongation at break A5 | feature |
|---|---|---|---|---|
| R200 | ≥ 680 N/mm² | 200–240 HBW | 14 % | unalloyed, softer grade |
| R200V | ≥ 680 N/mm² | 220–260 HBW | 15 % | vanadium alloyed |
| R220 | ≥ 770 N/mm² | 220–260 HBW | 12 % | unalloyed |
| R260 | ≥ 880 N/mm² | 260–300 HBW | 10 % | control quality in track alignment |
| R260Mn | ≥ 880 N/mm² | 260–300 HBW | 10 % | manganese-alloyed |
| R260V | ≥ 880 N/mm² | 280–320 HBW | 12 % | vanadium alloyed |
| R320Cr | ≥ 1080 N/mm² | 320–360 HBW | 9 % | increased wear resistance |
| R350HT | ≥ 1175 N/mm² | 350–390 HBW | 9 % | tight curves, high axle loads |
| R350LHT | ≥ 1175 N/mm² | 350–390 HBW | 9 % | increased resistance to rolling contact fatigue |
| R400HT | ≥ 1280 N/mm² | 400–440 HBW | 8 % | highest loads, very tight bends |
Next step
Further processing